DIN 15401 Crane Hook #1.6

Technical Specifications:

  • WLL:1t-500t
  • Hook Material:Q345qD, DG20Mn, 35CrMo, 34CrMo4, 34CrNiMo6
  • Hook Number:From 1.6 to 250
  • Strength Grade:P, S, T, V
  • Hook Standard:DIN 15401
  • Hook Type:Single crane hook
  • Forging Method:Die Forging (RS(N)) or Free Forging (RF(N))
  • Production Process:Forging, Heat treatment

Spread the love

Single forged shank hooks of DIN 15401 standard are used in a wide variety of applications ranging from small rigging blocks, hoists, lifting beams, to heavy-duty cranes. We not only provide standard-size shank hooks, but also customized hooks.

Technical Drawing Parameters for Crane Hook

Please select the hook type based on the parameters provided in the following drawings. Alternatively, you may supply details such as working load limit (WLL), hook material requirements, strength grade, applicable standards, hook type (double or single), forging method, and the range of hook numbers, or provide specific drawing parameters. We shall conduct precise screening to accurately match and select suitable hook products for you.

DIN 15401 Crane Hook 1.6 Drawing
Overall dimensions (mm)Weight
Noa1a2a3b1b2d1e3h1h2kg
1.656456445383611856484.5
2.563507253454213267586.3
471568063534814880678.8
5806390716053165907512.3
690711018067601851008517.1
8100801139075672101129524
1011290127100857522112510634
12125100143112958525214011847
161401121601251069528016013266
20160125180140118106330180150112
25180140202160132118360200170160
32200160225180150132400224190220
40224180252200170150447250212310
50250200285224190170485280236430
63280224320250212190550315265600
80315250358280236212598355300860
1003552804023152652366884003351220
1254003154503553002657504503751740
1604503555054003353008255004252480
2005004005654503753359005604753420
2505604506355004253759806305304800

Inspection Methods for Crane Hooks

To ensure the safety, reliability, and long-term stability of crane hooks during operation, multiple stringent inspections must be conducted both prior to factory release and throughout their service life. These primarily encompass visual inspection, dimensional measurement, non-destructive testing, and mechanical property testing.

1. Visual Inspection

Visual inspection forms the foundational step in crane hook testing. It involves visual examination of the hook’s overall structure and critical load-bearing areas to verify surface finish compliance and normal machining marks. Where necessary, auxiliary tools such as magnifying glasses may be employed for focused inspection of suspected defect zones, aiding inspectors in making accurate assessments.

2. Dimensional Measurement

Dimensional testing confirms whether the hook’s key structural dimensions conform to design drawings and relevant standards. Typically, measurements include the opening dimensions of the hook mouth, the diameter and length of the hook body, and the dimensions of the threaded section. All dimensions must fall within the tolerance ranges specified by applicable standards (e.g., DIN 15401 / DIN 15402). Deviations from permissible tolerances in critical dimensions may cause abnormal stress distribution, thereby reducing the hook’s rated load capacity and compromising safe operation.

3. Non-Destructive Testing (NDT)

Non-destructive testing identifies internal or surface defects without compromising the hook’s structure, serving as a vital safeguard for hook integrity. Magnetic particle testing (MT) detects surface and near-surface flaws such as cracks and folds. Ultrasonic testing (UT) locates, measures depth, and assesses dimensions of internal defects like cracks and inclusions, making it suitable for critical load-bearing areas.

4. Mechanical Property Testing

Mechanical property testing verifies whether the hook’s material and overall structure meet design strength and service life requirements. This primarily includes hardness testing, tensile testing, and fatigue testing. These inspections ensure the mechanical performance and safety of lifting hooks.

Send Your Inquiry Now